How to update your CFW
If you are on Atmosphere 0.20.1 or lower, please check this guide to update your CFW.
There are two methods when it comes to updating your CFW:
PC Method
Sigpatches need to be updated only on each firmware update, not each CFW update. This is thanks to sys-patch.
You can access your SD card contents via USB by following this guide.
What you'll need:
- Hekate
- Atmosphere
- fusee
- Only download this if you are using
fusee.bin
.
- Only download this if you are using
- Sigpatches
- Only download this if you are updating your firmware.
Steps:
- Extract the following files to your SD card:
atmosphere-x.xx.x-master-xxxxxxxx+hbl-x.x.x+hbmenu-x.x.x.zip
hekate_ctcaer_x.x.x_Nyx_x.x.x.zip
SigPatches.zip
- This file is only necessary if you have updated your firmware.
- When asked to overwrite any files, click Yes.
- Move
fusee.bin
to/bootloader/payloads/
.
Switch Method
What you'll need:
Setup:
- Extract
aio-switch-updater.zip
to your SD card. - Move
sigpatch-updater
to the/switch/
folder on your SD card.
Steps:
- Enter All In One Switch Updater.
- Scroll down to Update Atmosphere and pick
atmosphere-x.xx.x-master-xxxxxxxx+hbl-x.x.x+hbmenu-x.x.x.zip
. - Select Continue.
- When asked to overwrite existing
.ini
config files, select No. - When asked to delete all the custom sysmodules startup flags, select Yes.
- When asked to overwrite existing
- You will now be asked to download
Hekate
. Select Yes.- When asked to overwrite existing
.ini
config files, select No. - When asked if you want to copy the Hekate payload, select No.
- When asked to overwrite existing
- Select Continue to reboot your device in order to finish the update process.
- Enter Sigpatch-Updater.
- Select Update sigpatches.
- Reboot your device.